Shure BETA91A Kick Drum Microphone
Shure BETA91A Kick Drum Microphone
$619.00
Availability:
Out of stock
SKU
SHU-BETA91A
or 4 interest free payments of $154.75
with
×
Shop online now,
pay over time.
pay over time.
Get 6 weeks to pay, interest free.
Choose Zip at checkout
Quick and easy. Interest Free.
Use your debit or credit card
Apply in minutes with no long forms.
Pay in fortnightly instalments
Enjoy your purchase straight away.
© 2021 Zip Co Limited
Product Features
- Wide Frequency Response
- Low-Profile Design
- Cardioid Polar Pattern
- Interchangeable Cartridge
Overview
The Shure Beta 91A is a boundary microphone that can double as a kick drum mic, as it can capture the punch and attack of low-frequency instruments such as kick (bass) drums. It features a wide frequency response well suited for capturing a variety of audio signals such as organ and piano. The flat, boundary design also aides in producing a strong, solid low-end response, as well as make it easy to mount inside of a bass drum. The Beta 91A is ideal for both recording and sound reinforcement alike.
Key Features
- Uniform half-cardioid polar pattern for maximum gain-before-feedback and rejection of off-axis sound
- Low-profile design features integrated preamplifier and XLR connector to facilitate setup efficiency while minimising stage clutter
- Frequency response tailored for kick drum/low frequency applications with a wide dynamic range for use in high SPL environments
- Two-position contour switch to maximise attack and clarity depending on application: select the flat response setting for natural sound in most applications or the Low-Mid Scoop setting for a strong low frequency punch with plenty of higher frequency attack
- Furnished with zipper pouch
Specifications
Transducer Condenser (electret bias) Polar Pattern Half-cardioid Frequency Response 20 to 20,000 Hz Output Impedance 146 Ohms Sensitivity -48.5 dBV/Pa (3.8 mV) Maximum SPL 2500-Ohm load: 155 dB (1 kHz at 1% THD)
1000-Ohm load: 151 dB (1 kHz at 1% THD)Maximum Input Sound Level 20 Hz to 20 kHz, less than 1% THD Signal-to-Noise Ratio 64.5 dB Dynamic Range 2500-Ohm load: 125.5 dB (1 kHz at 1% THD)
1000-Ohm load: 121.5 dB (1 kHz at 1% THD)Clipping Level 2500-Ohm load: 12.5 dBV
1000-Ohm load: 7.5 dBVSelf Noise (Equivalent SPL) 29.5 dB SPL (A-weighted) Common Mode Rejection ≥55 dB (20 Hz to 200 kHz) Switch Frequency Contour Switch: 7 dB of attenuation centred at 400 kHz Power Requirements Phantom Power: 48 VDC +/- 4 Vdc (IEC-268-15/DIN 45 596), positive pins 2 and 3 Polarity Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 Power Requirements 11 to 52 VDC phantom power, 5.4 mA Output Connectors 1 x XLR male, balanced Dimensions 95.1 x 139.1 x 20.3 mm Weight 470 g
| Clearance Item | No |
|---|---|
| Brand | Shure |
Write Your Own Review