The black 10” Art 7 Series ART 710-A MK II Active 2-Way Speaker from RCF offers substantial power for a variety of professional applications that include primary sound reinforcement and supplementary fill for larger systems. This speaker is equipped with a 700W digital amplifier (500W for the woofer and 200W for the compression driver), and is controlled by a multiway DSP. The result of this is high output, low distortion, and natural sound. The DSP takes care of crossovers, equalisations, soft-limiters, RMS limiters, and large signals compression. The amplifier presents XLR/jack (combo) balanced inputs, XLR output link, volume and a switchable AEQ mode (flat/ boost). The amplifier features a solid mechanical aluminium structure that not only stabilises the amplifier during transportation but also assists in heat dissipation.
The compression driver uses a 1” throat diameter titanium dome featuring a vented suspension and is powered from a massive high flux neodymium magnet and an edge wound 1.7” aluminium voice coil. This driver offers a high output, transparent midrange sound, and clarity in high frequencies reproduction.
This ART 710-A speaker features a 10” woofer that, with a 2.5” inside-outside aluminium coil and a powerful magnetic structure, guarantees a fast and accurate mid-bass frequency range. The loudspeaker's design looks aggressive whilst retaining familiar Art ergonomics and is the result of extensive combined functional and acoustic research.
The two-way system cabinets are moulded in a special polypropylene Composite material and are designed to dampen down vibrations even at maximum volume settings. The reflex porting has been resized to offer better efficiency.
- 700W digital bi-amplification, 500W low frequency, and 200W high frequency power
- 129 dB maximum SPL
- Wide dispersion 90 x 70 constant directivity horn
- 10" high power woofer, 2.5" voice coil
- 1" Titanium dome, high frequency driver
- Electronic equalisation, soft limiter, and protection
- XLR/jack input and XLR signal output
- Ergonomic top handle for easy transportation and positioning
- Applications: Nearfield and distributed PA; foreground/background music, fill/delay; portable and installed audio-visual systems; conference centres, presentations, ballrooms, and houses of worship; compact voice reinforcement systems; stage monitoring
Frequency Response 50 Hz to 20 kHz SPL Maximum 129 dB Coverage Angle Horizontal x Vertical: 90 x 70° Driver Compression: 1.00" (25.40 mm) neo, 1.70" (43.18 mm) voice coil Woofer 10.0" (254.0 mm), 2.5" (63.5 mm) voice coil Input Signal Impedance: Balanced/unbalanced Input/Output Connectors Combo XLR-jack/XLR Input Sensitivity 4 dBu Crossover Frequencies 1,700 Hz Protection Thermal, HF Limiter Fast limiter Controls Volume, flat, boost, mic/line Power Supply Switching 700 W Frequency High: D/200 W
Low: D/500 W
Cooling Convection/forced Connection VDE Cabinet Composite PP Hardware 2 x M10, pole mount
Pole mount cap
Grille Custom perforated steel grille with open-cell poly fibre backing Handle 1 on top Dimensions (H x W x D) 21.61 x 13.38 x 11.96" (549.00 x 340.00 x 304.00 mm) Weight 30.86 lb (14.00 kg)